Jan 032015
 

It can be hard for people to figure out where to go when they have a cooling or heating system issue. To prevent the situation from becoming disastrous, learn all you can on the topic. The tips listed here can assist homeowners in getting the help that they need.

If your HVAC system us giving you issues, take a look around the house prior to calling a contractor. Determine which rooms are hotter or colder than they should be. This will help the repairman determine what the problem is.

TIP! Regularly remove debris from outside condenser units. You never know when things can pile up, especially after a windy or rainy storm, and that can throw a wrench in your system.

What system do you have? You need this information to tell your contractor. It is important to understand what model it is and which brand it is. Also, if it has been serviced before, you should have that information handy. This helps make sure the contractor has the information they will need.

Before you ever begin looking for an HVAC contractor, first consider the entire job that you’ll need completed. They won’t be able to offer you a quote if they haven’t seen your system. If you do not know what you want, the process can become tedious, especially over the phone. Having this information handy will make the process much smoother.

Make sure your condenser fan is in good working order by wiping down the fan blades and the coils. First, turn off the power so that nothing will move as you are working on it. Then, take the grill off, pull the blades out, and gently clean them as well as the unit itself.

Cleaning the blades and coils will help the system run better. Shut off power before working or cleaning your system. Clean the outdoor condenser as well.

Be sure to regularly clean debris from external condenser units. Leaves and debris can accumulate quickly, particularly following storms, and that can cause problems for your system. Also, you are risking your system overheating.

When selecting the spot to put the outdoor compressor for your unit, choose somewhere that gets plenty of shade. The cooler the air that the unit is able to access, the less work it has to perform.

TIP! Put outdoor condensers in the shade. As it brings in cool air to cool, you will save a lot of money.

Clean the fan blades and coils in your condenser each spring. Don’t forget to disconnect the power first. Then, take off the grill and get the blades out. Clean everything with care.

During the fall, leaves can gather around your HVAC. Make sure you clean out your fan grill often once nearby trees start shedding their leaves. An obstruction, such as a leaf, prevents the maximum amount of cool air from entering the system.

If at all possible, install double-paned windows in your home instead of those with a single pane. Double pane windows can minimize the use of your air conditioner in hot weather since they keep the indoor air cooler. It also facilitates heat retention in winter.

TIP! Turn off your air conditioner when no one is home to help save money. The house will only heat to certain level and a decent HVAC system can quickly cool this down once you are home.

Many homeowners forget to oil their condenser at least once per year, but it is required. These ports are typically covered with caps made of metal or rubber. Look for an oil that is lightweight and then put about 10 drops inside the port. You don’t want to put in too much.

When your HVAC system fails during extreme hot or cold seasons, that can spell a disaster for anyone. However, had you known what you know now, you could have likely avoided the problem all together. These tips have armed you with all you need to know.

To choose a HVAC contractor, it is important to check their reputations. Check reputations at the BBB, and read online reviews to gauge customer satisfaction. It would be wise of you to take these steps.

Related posts:

 Leave a Reply

(required)

(required)

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>