Jun 282017
 

Your cooling and heating is vital to your home. A well-maintained HVAC system is a must. If you have a poor HVAC, you will be costing yourself a lot of money. What follows is a compilation of tips to help you keep your HVAC system in working order.

Before you choose an HVAC contractor, have an idea in your mind of what needs to be done. It will be difficult for an HVAC contractor to provide you with an estimate on the phone without knowing what your current setup is. If you can’t explain changes you’ve made, the process will be even more difficult. It’s a good idea to learn this information in advance.

HVAC units may suffer when leaves are falling off the trees. Make sure the unit’s fan grill is cleaned frequently when the leaves begin to fall. If your fan is obstructed, it can keep your system from working properly.

Before calling for help, know the system you have. Learn the brand, model, and if you have it, the maintenance history. If you have to have someone come out to repair the unit, you will be able to help the contractor understand more about what is going on.

Check to determine if the fan condenser on your HVAC system is equipped with oil ports, and if it is, be sure to lubricate every year. You will see rubber or metal caps covering the ports. Use a lightweight oil and do not overfill them.

If you can choose the place where your outdoor compressor goes, pick a spot with lots of shade. In this way, it will be cooling air that is already somewhat cooled. This saves energy.

If you are a homeowner, or if you can get permission from your landlord, install double-paned windows in place of any single panes in your home. In warmer months, these windows will help to maintain the cooler inside temperature. Conversely, this also works to keep warm air in during colder months.

Check the whole house before you call for help. Note which rooms are hot and which are cold. Doing so can help your technician fix your HVAC issue quickly.

Save energy use and money by turning off the air conditioner if there is nobody home. When it’s off the house will get hot, but only by a certain amount. If it is on all day, it is trying to maintain a cool temperature constantly, using a great deal of electricity to fight the heat.

Don’t let your home get overly hot. It takes quite a while to cool a home by more than 20 degrees. If you have your home at above 100 degrees then you can only get it to about 80 or above. Depending on how humid it is, this isn’t really that safe for a person to sleep in when it’s really hot.

Research the companies that you consider using. Check them out at the BBB and look for reviews posted by former customers. Doing these things beforehand will allow you to make a smart decision.

Cleaning the blades and coils will help the system run better. Except when you do superficial cleaning, you need to always make sure the power is off on the unit. Remove leaves and debris from the outside condenser.

Ask your friends and relations for their HVAC contractor recommendations. People that have had quality work done are usually more than willing to share this information. This is also a great way to get names of companies that should be avoided.

Check the Internet for reviews on those who fix or install HVAC systems. There are now different online sites that let customers share their service experiences. This is an awesome way to find contractors to work with.

Check around and get a number of quotes prior to hiring a contractor. You should save some money this way. Call at least four or five different HVAC specialist to find the best rates.

Be sure to clean external condenser units regularly. Particularly after bad weather, you should inspect your unit. If you do not, the unit may get too hot and cause additional problems.

To help your heating and cooling system run efficiently, install a radiant barrier in your attic. It will serve as a barrier between your home and the outside. If you do it right, you may be able to expand your living space into your attic.

If your system doesn’t seem to be working efficiently, check your ducts for leaks. Your utility company can test this for you, oftentimes at no charge. If not, it should be less expensive than a HVAC contractor. When you have leaks repaired, the testing has paid for itself.

When your unit is clicking, immediately go out and look to see if anything is inside it. There may be particles of debris that are touching the fans. Cleaning the debris will likely stop the noise. Check this out before calling a repairman.

Don’t get grass clippings on your outside unit. When you work with your lawn mower, make sure it spits the grass to the side opposite of your unit. When blowing leaves, do the same. Always take care when passing your HVAC units while moving leaves, grass or other debris.

Make sure your windows and doors are efficient. Make sure they are tightly sealed so air can’t seep in. You can hire a professional to test them all for you and often this testing is free.

Square Footage

Take a measuring tape and get the square footage of the area where the unit will be cooling. You can figure out the unit you need by calculating 20 BTU per square foot. If multiple rooms need cooling, just add their total square footage.

If you need to decide the best place to put your outdoor compressor unit, consider putting it in a location that is in the shade. Your unit won’t have to work as hard to cool the inside air if the outside air it sucks from is cooler.

If you’re only wanting to do the minimal amount of HVAC maintenance, you should work on replacing your air filter. It’s easy and has a huge impact on performance. Filters cost only a few dollars, so it’s a small monthly price to pay.

Always get some references before hiring any contractor. Talk to those references to find out if they were pleased with the service they received. Checking references helps you avoid scammers.

Understand the costs beforehand with your HVAC unit. Some contractors overcharge for add-ons like travel expense or fees for additional materials. Getting a contract that’s written and solid can assist you because you’ll avoid these kinds of issues.

Condenser units for the outdoors should be shut off when it starts to get cold outside. When the temperature goes below 60 degrees, shut off the unit in order to prevent damage. This simple tip will help keep the system running efficiently for many years to come.

Always check any references that you receive for an HVAC contractor. Lots of folks take them at face value, but that is not always smart. It will just take minutes to check out a contractor, so you shouldn’t hesitate.

See about getting a programmable thermostat on your HVAC unit. This device can save you a great deal of money on your heating and cooling bills because when you adjust the temperature to sync with your lifestyle.

You can save money by choosing an Energy Star approved HVAC unit. These are more efficient than other units. These are established by the U.S. Environmental Protection Agency (EPA). The research you do now can save you money down the road.

Installing a programmable digital thermostat can help save money. In fact, you can save as much as 10 percent on both heating and cooling when you turn your thermostat by by 10-15 percent for at least 8 hours daily. Also, you can find a thermostat that is controllable from a computer or smart phone.

You should now have a better idea of how to keep that HVAC unit running smoothly. Paying close attention to maintenance will help you avoid problems. These tips will help you to maintain your unit and avoid breakdowns.

Related posts:

 Leave a Reply

(required)

(required)

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>