Dec 232014
 

When you want to gain some knowledge with regard to HVAC, it is best to start small. This piece will help you learn all you need to know about it. Take the time to read the article and you will do well.

If your HVAC system us giving you issues, take a look around the house prior to calling a contractor. Note which of your rooms are hot and which are cold. Give this information to your contractor when they arrive.

TIP! By the end of spring, the fan blades and coils of your condenser should be thoroughly cleaned, so operation can proceed with greater efficiency. If you are doing more than a light surface cleaning, make sure that the power is shut off to the HVAC unit.

Make a circuit around your home before calling for help with your HVAC. Figure out which rooms feel hot and which feel cold. This will help your contractor quickly determine where the issue lies and how to get it fixed quickly and easily.

Outside Condenser

If the condenser for your HVAC system is located outside, make sure you clear away any debris that might settle in or around it. Falling leaves and wind or rain may cause debris to reduce the efficiency of your unit. Left unchecked, your unit is more likely to break down.

TIP! Every spring you need to make sure your condenser fan’s coils and blades on the fan part are clean. Before you begin cleaning the unit, make sure that it is unplugged.

In order to keep your outside condenser fan running efficiently, make sure the coils and the fan blades are cleaned before the cooling season begins. Except when you do superficial cleaning, you need to always make sure the power is off on the unit. In addition, always remove all debris such as leaves from the outside condenser unit.

Clean the fan blades and coils on the condenser fan every spring. Before you do so, shut off the power to ensure that none of the parts will move while you work on it. Then, take the grill off, pull the blades out, and gently clean them as well as the unit itself.

You must keep your HVAC systems oil ports lubricated annually. These ports are often covered by a rubber or metal cap. Pick a type of SAE 20 oil that is non-detergent and lightweight. Place 10 or less drops into every port to avoid overfilling.

TIP! Outdoor condenser units need to be turned off when the weather turns cold. To prevent damage, turn off your unit if the outside temperature is less than 60 degrees.

When you mow your lawn, take care that you don’t get grass clippings all over your outdoor unit. Make certain the debris goes away from it. This includes grass clippings and leaves.

If you are choosing where to place your outdoor compressor device, try to put it in a place where there is plenty of shade. The cooler the air which goes in, the less work the unit will have to do.

Replace any single-paned windows with double-paned versions. Having double pane windows allows your air conditioning unit to be run much less during the summer, because the cool air is kept inside the home. It also facilitates heat retention in winter.

TIP! To help keep your energy costs down, have your heating and cooling system serviced at least once a year. The contractor should oil the parts that move and check the motor and freon levels.

It’s not that hard to work with HVAC if you have info like this article provided you with. Careful study will help you avoid accidental breakage and potential injury. Good luck and hopefully now things will start to work fantastically for you well into the future!

Related posts:

 Leave a Reply

(required)

(required)

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>