Sep 232014
 

It’s not so difficult to get into HVAC if you know what you’re doing. If you want to learn more, use the tips here to help you. If this sounds interesting to you, then continue reading.

Before calling someone to repair your system, make sure you know what kind of HVAC system you actually have. Get information on the make and model, plus if you have information on the history of maintenance, that will help, too. In this way, you can be sure your repair person has all vital information.

TIP! Think about what improvements you want made before picking an HVAC contractor. If you can’t describe the problem, you may not get an accurate quote.

Be sure to clean the fan blades and coils of the condenser fan. First, make sure the power is off to ensure nothing moves while you are working. After you have turned the power off, you simply remove the grill and the blades to perform a gentle cleansing.

Grass Clippings

By the end of spring, the fan blades and coils of your condenser should be thoroughly cleaned, so operation can proceed with greater efficiency. Always turn the unit off before you do anything to it, including leaning. Remove leaves and debris from the outside condenser.

TIP! Regularly remove debris from outside condenser units. Debris can pile up at rates that increase during rainy or windy weather, and this can foul up the inner workings of your system.

Don’t let grass clippings pile up against your outdoor condenser. Now so the grass clippings are shot away from your unit. This is the same if you are using a leaf blower.

As the trees around your home lose leaves, it can cause your HVAC unit trouble. Clean outdoor units often to remove leaves. Because the fan requires a clear path for air to enter, you may encounter issues with your system if the fan gets blocked up.

The operation of your HVAC system can be in danger when the tree leaves begin to fall. Make certain you are cleaning the fan grill often if trees nearby have leaves that are falling. The fan needs unobstructed air flow, and if debris is blocking this air flow, then your system could suffer.

TIP! Consumers are usually advised to have their HVAC systems inspected twice a year. The best time of year to have the system checked is right before the weather begins to change.

If you are choosing where to place your outdoor compressor device, try to put it in a place where there is plenty of shade. The cooler air that the unit can suck in, the less work it will need to do to further cool the air.

Service your HVAC yearly. When they visit to service the unit they’re going to inspect the motors, oil the parts that move, and see how much freon is in your system. These few simple things will help your system to run at its peak performance.

If you want your energy costs to go down, have the heating an cooling system you own serviced every year at least. During your service visit, the serviceman will inspect the unit’s motor, oil the unit’s moving parts and ensure the unit has proper freon levels. These repairs will keep your HVAC system running smoothly.

TIP! Don’t allow your home to overheat. AC units will only cool a house down 20 degrees.

If there isn’t anyone at home, then there’s no need for the AC unit to be running and wasting electricity. Turning it off does allow the temperature to rise, but only so far. Leaving your heating or cooling running full blast while you are away is a waste of money and energy.

With the right information, even an HVAC system is simple enough to understand. Be sure you pay close attention to everything as you learn. Use the tips here to help you get to work now!

Occasionally, ice will form on your AC. There are sometimes also freezes that happen in a drain line, and this can be confused for a plumbing leak. If this is something that’s happening to you, change the setting on your thermostat to the fan setting and this will disable the compressor. The fan setting can help melt some of the ice, but you should still call a professional to check your unit out.

Related posts:

 Leave a Reply

(required)

(required)

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>