Sep 262014
 

The cooling and heating system in your home plays a major role in your comfort. This is the job of the HVAC system, which means that it must be kept it kept operating properly over the years. If you’re not able to take care of it, things will cost a lot to fix and it will be hard to live with it all. The following advice will help you keep your HVAC in great shape.

Cleaning the blades and coils will help the system run better. Except when you do superficial cleaning, you need to always make sure the power is off on the unit. Remove leaves and debris from the condenser outside.

TIP! When you are choosing a location for the outdoor compressor unit, it’s preferable to use a shaded area. When it draws in air for cooling, it will be more efficient because it will not need to work as hard to cool down the air.

Before contacting a repair service, do a short tour of the entire home. Figure out which rooms are too cool or warm. If you do this, it will be a great help to the future contractor, who will now be able to quickly locate the problem issue.

To make sure your condenser fan works properly, keep the fan blades and the coils clean. Turn off your power before doing any job like this. The outside condenser unit should be kept free of leaves and other debris.

Be sure to place your outdoor unit in a shady spot to maximize efficiency. As your air conditioner sucks in cool air, little will have to be done to cool it any further, saving you a ton on your energy bills.

TIP! A programmable thermostat can really help you out when it comes to your power bills. It will help save on your heating and cooling costs by turning itself down at certain times.

If your condenser units are outisde, make sure any debris is cleaned from them regularly. After a wind or rain storm things may pile up, causing problems with your HVAC system. It can cause the unit to overheat and break down.

Each spring, clean the fan blades and coils on your condenser. First, the power should be turned off so things don’t move as you work. Next, pop the grill off, put the blades out and start to gently clean them along with the unit.

Don’t let your home get too hot. An AC unit will reduce the internal temperature of your home approximately twenty degrees in a fair time. If your home happens to get near 100 degrees Fahrenheit, then you will only be able to reasonably cool to around 80. Depending on how humid it is, this isn’t really that safe for a person to sleep in when it’s really hot.

TIP! Search online for reviews to find an HVAC customer you can trust. There are quite a few sites now that allow customers to share their experiences with different services.

The operation of your HVAC system can be in danger when the tree leaves begin to fall. Make sure the fan’s grill is cleaned often during the fall. If your fan is obstructed, it can keep your system from working properly.

Some fan condensers may contain oil parts, and if yours does, ensure it is lubricated at least once per year. These ports have a metal covering. Sometimes it is rubber. Look for an oil that is lightweight and then put about 10 drops inside the port. You don’t want to put in too much.

Try to get as many quotes from contractors that you can. If you call people before you work on hiring one person, you can save some money overall. Ideally, you should call five to six contractors to get a good idea of what a reasonable rate is.

TIP! A radiant barrier is something that you may want to consider. This mechanism will prevent outside heat from coming in, reducing your energy consumption when cooling.

You now have an idea of what it takes to keep an HVAC system running great. Paying close attention to maintenance will help you avoid problems. Use the tips from above to keep it going strong, so you don’t come home one day to find your place too hot or too cold.

Related posts:

 Leave a Reply

(required)

(required)

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>