Feb 112016
 

HVAC systems may be hard to understand to begin with, but if you have proper information, it won’t be that difficult. If you’re interested in learning all about it, you’ve landed on the right page. Keep reading if you want to get into HVAC.

If your HVAC is running into problems, check out each room in your house before calling for assistance. Determine which rooms feel cold and which feel hot. This will help your contractor quickly determine where the issue lies and how to get it fixed quickly and easily.

Keep outside condenser fans running smoothly by cleaning fan blades and coils before the summer begins. Always shut the power off before doing any work or cleaning on the unit. Remove leaves and debris from the outdoor unit.

Before you start calling to find someone to fix your unit, make sure you know the type of system that is installed. Look for the model and brand number. This makes sure your contractor will be sufficiently prepared.

Clean the condenser on your debris regularly. After a wind or rain storm things may pile up, causing problems with your system. It may begin to overheat, causing massive damage.

Clean the fan blades and coils in your condenser each spring. Before you do anything, however, turn the power off. Then remove the grill, remove the blades and clean it from top to bottom gently.

Be careful when doing yard work that you do not get debris on or in your unit. Try shooting the clippings away from it. This also applies to blowing leaves or moving debris. Just be careful with that exterior HVAC unit.

Check the whole house before you call for help. Figure out which rooms are hot and cold. That will help your repairman figure out where the problem is, and how he can fix it easily and quickly.

Your HVAC system could suffer when trees begin dropping their leaves. Make sure you clean out your fan grill often once nearby trees start shedding their leaves. The fan needs to have an unobstructed path for air to enter the unit, and if it becomes blocked, you will end up with many headaches with the unit.

Find a place that is shaded for your compressor. When it draws in air for cooling, it will be more efficient because it will not need to work as hard to cool down the air.

In order to boost efficiency, place new outdoor units or move your current unit to a place which resides in the shade. This will help ensure that the AC is pulling in cooler air, reducing the amount of work it has to do and saving you money.

Clean the fan blades and coils in your condenser each spring. First, make sure the power is off to ensure nothing moves while you are working. Next, pop the grill off, put the blades out and start to gently clean them along with the unit.

Make sure you have your HVAC system checked at least twice a year. The ideal thing to do would be to have it checked out in the fall and spring so you’re able to figure out if everything is ready for the cold and hot months. Even if everything seems fine, check things out to find potential problems.

When it gets cold outside, it is necessary to turn off outdoor condenser units. If you get into temperatures that are less than 60 degrees you need the unit to be shut off so it doesn’t get damaged. You’ll pay less for repairs which you follow this tip.

Make use of a thermostat when you are installing an HVAC. A thermostat that’s programmable is going to save you around ten percent on the heating and cooling costs you have to pay when you turn it back about fifteen percent for a part of the day. Furthermore, there are a few programmable thermostats that you can control from your computer or any other web-connected device.

Do not allow grass clippings to cover the outdoor unit of your HVAC system. Shoot grass the other way. If you’re blowing leaves, this same problem can occur, so make sure you move around the unit and blow the leaves away from it.

You should have your HVAC system inspected at least once, but preferably twice, per year. This visit will include a motor inspection and checking the freon. This will keep you energy efficient and comfortable.

Shut off the air conditioning if nobody is home. Your home will become somewhat warmer during this time. The longer the unit stays on, the more it ends up costing you in energy bills.

Some air conditioners can ice up. There are also occasional freezes in the drain line, which are often confused for plumbing leaks. If you notice this, switch your thermostat to fan only to disable the compressor. You should still call a professional to help regardless.

A shady spot is always a good choice for the placement of your outdoor compressor. The cooler the air that the unit is able to access, the less work it has to perform.

Find an air conditioner calculator online to determine what models are best for you. If you get something that’s too big, it won’t work as well for you in the end. Look in the manual or on the manufacturer website for this information.

Check for duct leaks if your unit seems to not be working efficiently. You can have your utility company test for you, sometimes for free or less than an HVAC contractor would charge. Once you fix the leaks, the savings will be more than worth the hassle.

For top efficiency, figure out what direction your home faces. Block the sun in the morning with trees around your home. A cooler home means less work for your air conditioner.

To increase the efficiency of your HVAC unit, be sure to keep it in the shade. When your unit sucks in cooler air, then much less is required to cool it further, which saves you money on energy bills.

It’s important to have doors and windows that are efficient for the most efficiency for your HVAC unit. Be sure their seal is tight so no exterior air gets in or interior air gets out. You can also hire someone to test them.

Pick a contractor who gets back to you quickly and understands the job. The most reliable companies make sure their technicians stay on schedule and keep appointments. The technicians will be able to help you and offer the best possible options. This will maximize your overall satisfaction.

Get references from anyone you are considering hiring. You want to make sure that the contractor has satisfied previous customers. By checking references, you can avoid being cheated.

Update the windows in your home to double-paned if you own it. Having double pane windows allows your air conditioning unit to be run much less during the summer, because the cool air is kept inside the home. When it is cold in the winter months, these same windows will keep the warm air inside as well.

Whether you are repairing your existing unit or installing a new system, consider a programmable thermostat. This device can save you a great deal of money on your heating and cooling bills because when you adjust the temperature to sync with your lifestyle.

Energy Star

To save some cash, try picking an Energy Star HVAC unit. Energy Star units must meet certain guidelines. These standards are determined by the United State Environmental Protection Agency. They are in charge of protecting the environment and human health. Saving money on utility bills means a little bit of research.

Shut off the air conditioning if nobody is home. Turning it off does allow the temperature to rise, but only so far. If the A/C is on when you’re gone, it’ll be working hard constantly.

With the proper education, an HVAC system is able to be understood. This can help you determine when to call a repairman, when to choose a new system and what to look for in a system. Use these tips to improve the time you spend working on your HVAC system.

Jan 282016
 

Many people want to learn more about their HVAC unit, but they aren’t sure where to begin because they think it is simply too complicated. This doesn’t have the be the case, however. Use these thoughts to help increase your understanding.

Before you contact people to assist you in getting your system fixed, know what kind of system you’re working with in the first place. Look for the maintenance history and brand and model. Then, you’ll be ready to tell the contractor what they need to know.

Before contacting a repair service, do a short tour of the entire home. Figure out which rooms are too cool or warm. Figuring this out will the contractor to diagnose the issues and quickly get to work on fixing it.

Get all of the details regarding a broken system before calling for repair. Take a look at the system or the owner’s manual to find the name and model number. This information will be helpful to any contractor you hire to repair it.

Understand what you want before talking to a contractor. It will be difficult for an HVAC contractor to provide you with an estimate on the phone without knowing what your current setup is. It will be even harder if you cannot explain what you have done. Thus, it is worthwhile to have this knowledge ahead of time.

Do not allow grass clippings to cover the outdoor unit of your HVAC system. Shoot the grass away from the unit. Make sure you move around the unit and blow the leaves away from it while blowing your leaves.

When choosing the area for placing an outdoor compressor device, place it in a shady area. This will limit the work that it has to do.

What do you need done? Know this before calling a contractor. It’s hard to get an estimate since they haven’t look at your system. It will be way more hard if you can’t figure out what they need to do. So, figure out this information before anything else.

It is a good idea to replace single-paned windows with ones that have double panes. Double pane windows can minimize the use of your air conditioner in hot weather since they keep the indoor air cooler. This also works during the cold months to keep the warm air inside.

Having a programmable thermostat installed is a money saving idea. This will help you to keep the temperature at optimal levels. Also, you can find a thermostat that is controllable from a computer or smart phone.

Always take the time to check out the reputation of any HVAC contractor before you consider hiring them. Check reputations at the BBB, and read online reviews to gauge customer satisfaction. Doing this makes it more likely that you choose wisely..

Clean the condenser coils and fan at the beginning of the year to help the unit run efficiently. Be safe and turn off the power supply before working on your HVAC unit. Clean off any leaves or debris from your external condenser unit.

Ask friends and family for contractor recommendations. People that have gotten great work done in the past generally love to share the information they know about it. This will prevent you from getting scammed.

Checkout online reviews if you do not know which contractor to call for installation, maintenance or repair of your HVAC system. Many websites allow consumers to share their experience with a service. This will help you to sort out the good from the bad.

Make your HVAC work efficiently when you consider what way your home faces. If you have some trees that are placed in good spots, you can be sure they block the sunlight during the morning. If there’s less heat inside your home, your AC will work less.

If your condenser units are outisde, make sure any debris is cleaned from them regularly. Things pile up after storms and damage your system. It can get overheated, which will cause problems with the whole system.

If you HVAC unit is making a clicking sound, check immediately for any debris that may have accumulated in it. Sometimes there is debris that gets in the fan’s way. That is a simple solution; just take the debris out. Take a look for yourself before you call a technician out.

The HVAC system is only one piece in an efficient home. You must also consider the quality of your windows and doors. They have to have a tight seal, stopping air from going in or out. Ask a contractor to test them for you.

You should replace the filter on your HVAC system once every month. This will maximize the production of your HVAC. It only costs a couple of bucks to replace the filter.

The coils and blades on the fans should be cleaned once a year. For safety, always turn the power off first. Then, take the grill off, pull the blades out, and gently clean them as well as the unit itself.

Think about the air flow direction of your A/C when figuring out where to put it. If you have to put the unit in a corner, use one that doesn’t blow into the wall.

Never hire a contractor before asking about the work experience they have when it comes to dealing with HVAC units. You need to be sure that they’re able to do the work and have done it before. Don’t risk the success of your job by taking a chance on someone who may not be able to do it right.

Only choose a contractor to repair or install your HVAC unit if they provide a 24 hour hotline in case of emergencies. They owe it to you to show up to fix anything, no matter how extreme the weather or what time of day it may be.

Make sure that you do not cover your outdoor components with grass clippings when you are trimming the grass. Make sure you shoot the clippings in the other direction from the unit. Make sure you move around the unit and blow the leaves away from it while blowing your leaves.

Ask if heat-loss calculation is included when an HVAC contractor is offering you an estimate. This particular equation will help you estimate the number of BTUs needed to keep the home in a comfortable condition. They need to consider all doors and windows, insulation and room sizes.

If you are installing a new HVAC system or even repairing your current set-up, ask your contractor about also installing a programmable thermostat. This lowers your bills as it constantly adjusts your settings to ensure optimal performance.

To keep some money saved, get a unit that’s Energy Star certified. Products with this logo save money on electricity and are much more environmentally friendly. The EPA regulates the guidelines for the star. Agency for Environmental Protection. Doing a little homework can save you a lot of money.

Lubricate your condenser yearly if it has oil ports. They are usually fitted with a rubber or metal cap. Pick out a SAE 20 type of oil because it has no detergent, is lightweight, and you should put around 10 drops in the ports but make it to where they don’t get too full.

It is amazing that 66 percent of homes have ducts that leak. These leaky ducts can account for up to one fourth of your total utility costs. Getting your ducts sealed is not expensive and isn’t hard. You can probably do it on your own and it will help you to save on things each year.

Choose a contractor that prefers Energy Star products. These systems meet strict efficiency guidelines set by the EPA. This can help you reduce your expenses throughout the year.

Follow the advice presented here to ease your way into the world of HVAC repair and maintenance. Use the above tips to help you begin. Start as soon as you can for the best results.

Be sure to place your outdoor unit in a shady spot to maximize efficiency. If your air conditioner is able to constantly suck in cool air, it won’t have to work overtime to cool your space, which can in turn save you money on your electricity bills.