May 022017
 

When the HVAC system fails, you may not understand the next steps to take. Learning about them may keep a small annoyance from becoming a huge disaster. This article was written to help homeowners get the proper help they need for their HVAC unit.

Before an HVAC expert comes to your home to do any repair work, walk around the home and check out the temps in every room. Find out which rooms are hot and which are cold. This will help your contractor quickly determine where the issue lies and how to get it fixed quickly and easily.

Each spring, try cleaning the fan blades and coils on the condenser fan. Before you do anything, however, turn the power off. Remove the grill and carefully clean the blades and surrounding areas.

Always make sure you are up-to-date about your HVAC unit. Write down the brand and the model and have all maintenance records on hand. This will help you give the new contractor the necessary information.

Keep your outdoor units free of debris when your cutting grass. Instead, make sure that the grass is shooting in the opposite direction. Make sure you move around the unit and blow the leaves away from it while blowing your leaves.

The HVAC unit in your home can become damaged from falling leaves. Make sure the fan’s grill is cleaned often during the fall. If your fan is obstructed, it can keep your system from working properly.

If you have a fan condenser with oil ports, it needs to be lubricated every year. You can find these ports covered with rubber or metal caps. Look for an oil that is lightweight and then put about 10 drops inside the port. You don’t want to put in too much.

If problems arise with the HVAC system, check the entire house before contacting someone to come for repairs. Pay attention to which areas of the house are warm and which ones are cool. That knowledge can help the technician figure out what is going on.

Double Pane

It is always a good idea to swap out single pane windows for double pane ones. Double pane windows help minimize your air conditioning use in the summer by keeping the cooler air inside your home. Conversely, they keep warm air in during the winter.

One great way to save some cash when you’re working on keeping a home cool is to install a thermostat that’s programmable. A thermostat that’s programmable is going to save you around ten percent on the heating and cooling costs you have to pay when you turn it back about fifteen percent for a part of the day. Take advantage of the convenience of the ability to control many programable thermostats from your favorite electronic device.

Before you choose someone to do HVAC work, figure out what they need to do for you. You might not be able to get a price quote unless you let the contractor see your current system first. You need to know how to describe any issues. So, you should know this beforehand.

Keep energy costs from rising by having your system serviced annually. This visit will include a motor inspection and checking the freon. This will help your system run better.

Shop around before hiring an HVAC contractor. Check with the BBB (Better Business Bureau), and look them up on review sites online to see what previous customers have to say about their experience. In this way, you can be more sure of getting a good HVAC company.

Research what size air conditioner you should purchase for the size of your home by using online calculators they have for this purpose. Proper sizing will increase efficiency. Look at the manual to determine the recommended size for air conditioners.

Keeping the outside condenser clean of debris and leaves will improve the system’s efficiency. Before you do clean the coils and fan blades, always take the precaution of turning off all power to the unit. Keep the exterior of the condenser unit free of debris.

Put a radiant barrier in your attic and what your HVAC performance improve. This mechanism will prevent outside heat from coming in, reducing your energy consumption when cooling. If you do things right your attic can be used as a living space too.

Look for leaves or other debris if you notice a thumping sound in your unit. It could be that debris has made its way into the system. All you have to do is get this debris out of there to fix the problem. See if you can do it yourself before getting a professional.

The windows and doors in your home must be efficient in order for your HVAC to perform as efficiently as possible. Be sure that they’re sealed well so that air from the outside or inside doesn’t come in or escape. You can get these tested at little to no charge by a professional.

Keep your outdoor units free of debris when your cutting grass. When you work with your lawn mower, make sure it spits the grass to the side opposite of your unit. This also applies when you blow leaves, so be very careful near your exterior HVAC units when you move debris.

Replace the air filter in your HVAC system every month. It is the easiest way to take care of it. It is a small cost to do this.

Hire an HVAC contractor that is efficient and quick. The best companies out there have technicians that keep a schedule and their appointments too. The technicians should also be able to diagnose problems in your HVAC in no time. Once, they find the problem, they will fix it fast.

When choosing someone to work on your HVAC system, make sure they provide you with references. Be sure previous customers got the service and value they expected. This can assure you hire someone trustworthy.

When the trees are losing their leaves, your HVAC unit can suffer. Frequently clean the fan grill when trees are shedding leaves. The fan must stay clear in order to function, and if it gets blocked, you will have to contend with problems.

Always be very clear about what will be included in your estimate of cost on any HVAC work you have someone do. You might find that some contractors try to add hidden charges for odd items, such as materials and fuel. When you have a solid contract, these problems can be avoided.

Cover your condenser in the winter. This will make sure the condenser will last for a long time. Also, when it’s less than sixty degrees outside, you shouldn’t use the compressor. Instead, put the fan on and don’t strain it.

Call the provided references when hiring a new contractor. You may be horrified by what you find. It only takes a couple minutes to call to check a person out by calling, so don’t worry about doing that.

A good place to place your compressor unit outside is in a shady spot. When it draws in air for cooling, it will be more efficient because it will not need to work as hard to cool down the air.

Talk to your contractor about putting in a smart thermostat. This can save you a lot on your energy bills and gives you a nice comfortable home.

Environmental Protection Agency

Opt for an Energy Star HVAC unit. Products with this logo save money on electricity and are much more environmentally friendly. The Environmental Protection Agency is what sets these guidelines. These guidelines have been set up by the United States Environmental Protection Agency. Using units that meet these tough standards will save plenty of money on energy expenses over the years.

Boost energy efficiency by putting your condenser unit in the shade. When the air conditioner pulls in cooler air, it won’t have to do much more to cool it and that will save you a lot of money on energy bills.

When a homeowner’s HVAC unit stops working, they could find themselves in a real pickle. However, had you known what you know now, you could have likely avoided the problem all together. The tips you learned here can help homeowners make informed decisions regarding their HVAC systems.